Attached script, in Firefox it work and contex manu is open after the right click
In chrome the right click do not open the contex menu (Step 10) [it only open for a frection and uaer cannot choose any value]
I cannot attached the zip file of the run that i have
I am running into an issue where a script will not record or playback due to an SSL issue in the subject. I have exhausted a lot of options but can't seem to get it working since the root CA certificate was updated on the puppet server.
I have created a .pem cert and loaded that into port mappings.
I tried all combinations of Socket / Wininet / Socket & Wininet
I have tried different SSL Versions / Ciphers along with the options in port mapping.
I installed the certificate into Personal and Trusted Root CA (along with the server cert)
I ran this file - wplusCAOnly_Expiration_2022.crt
The original cert works fine manually.
I got rid of all expired certs in Personal and Trusted Root CA
I disabled the Firewall
I have LoadRunner version 12.53.
I also found this link - https://softwaresupport.hpe.com/group/softwaresupport/search-result/-/facetsearch/document/KM01860986?lang=en&cc=us&hpappid=202392_OSP_PRO_HPE
(but that says for 12.50 and older - those .dlls i have are newer than the ones in the support case)
Anything else I missed?
Thanks,
Mark
HI All,
We have record the script with HTTP+Oracle nca protocol and observer below function get continuosly recorded and when we run the script it get fail.
Pleaes note earlier same script is working fine but in new recording below things get added continuosly.
nca_wait_for_timer(NCA_TIMER_NEAREST);
nca_wait_for_timer(NCA_TIMER_NEAREST);
nca_wait_for_timer(NCA_TIMER_NEAREST);
Just want to understand why this thing added continuosly is the issue of application or vugen and what is the solution for the same.
Regards'
Hello,
As part of our efforts to improve, we'd like to hear from any user of Ariba Buyers application about your experiene with this application and LoadRunner / Performance Center.
Please email us at plv_cost@hpe.com if you are willing to share your feedback on this.
Thank you,
Lior
HI Team,
I am facing Windows update issues while installing LoadRunner v12.53 trial version.
I am using Windows 8 64 bit system.
Kindly help
Also suggest how can I possibly install previous version of LoadRunner.
Thanks
I am using Windows 10 and Loadrunner 12.53. I was able to run some tests 2 weeks ago on Windows 10, and I never received this message. Late last week I upgraded to Patch 4 for Loadrunner and the Load generators, and now I am receiving this error. It occurs at the start of each test, and shows up 6 times, once for each Load generator. I do not believe it is causing any issues, but I have looked online and see no trace of thsi error.
Each Load generator is running Windows 10 and is using Patch 4 as well. I am running Oracle NCA and Web/HTTP protocols.
Any help would be appreciated.
Hi all,
I'm using LR Community Edition with a TruClient test i have recorded with VuGen.
I get the following error:
Error occurred while trying call 3rd party license component. Error Message: 4002
I think LR is not being able to work with TruClient. However, all protocols except DCOM and GUI should be included in the free edition.
I've not found anywhere error code 4002...
Any clues?
Thanks in advance
HI,
We are using 12.50 LR version, Ajax Truclient IE protocol to record an application which is SSO enabled. It means, as soon as application' URL is launched in IE browser, it sign-in using windows credentials. In case of our Truclient IE record and replay, it picks my windows credentials and plays back, but inorder to make this script work with other User IDs, is our show stopper.
While recording in IE we dont see any Pop-up or dailog box asking for user credentials. In the script step as well, we dont see paramters. So when we replay, it picks the machine local credentials and tries to login. But my requirement is to make the script workable with whatever User IDs i pass it from external file(Parameter file).
is there a solution to handle SSO authentication simulating more than one user ID.
Is there a way to change settings of Truclient IE version to enable windows dailog prompt for user credentials
Thanks
Sharath
Hello Experts,
Our org is migrating the data center from NY to Location Calif ,but users will access the application from NY and our LG machines are also migrating to calif. In this case,can we use network Network Virtulization to monior the network packet loss or for latency?
If so, can you please suggest how to use NV during test?
1)We already purchased license for LR and not for NV. iF we have to purchase license for NV,on what basis should be purchased? Like number of users or location?
2)Should we install NV on both Controller and LG machines ?
Please advise.
Hello Experts,
I am looking to learn typical protocol like CITRIX , RDP Protocol scripting. Is there a way we can learn those protocol before assigned to specific project? Do we have any test application like Webtour where we can learn and get familiar with the scripting.
Any suggestions?
I am getting this error when i replay the script, i hope it shuould be something to do with tokenization when moving from one page to another.
I even tried correlating all the values and even after that i am getting this error. Can someone help me with this issue?
Hi,
If anybody can give me information on below , It would be great.
1) I am using VTS latest version which supports Load Runner 12.02 and need to know whether VTS server can handle concurrent virtual user access..Is it queueing user requests and then, serve? or whether it has capabilty to handle concurrent virtual users (say 50 users).
2) I use below code snippets to read column data and it worked. However, after few iterations, it was found that the data in the table was exhausted. Is there any VTS function onlyto read data so that data in the table is not exhausted?
int rc = 0;
lr_start_transaction("retrieve_column");
rc = lrvtc_retrieve_row();
lr_log_message("retrieve_row rc=%d\n", rc);
lr_log_message("%s", lr_eval_string("{CustomerID}"));
lr_end_transaction("retrieve_column", LR_AUTO);
Hi,
I am getting below server response whenever runs a perticular function. Due to that not able to proceed further.
Server replay response:
Xhttp://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher/faultD��\+{+HM��:�)9��VV�V�V��s�:�SenderV�V� aRhttp://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher�a�:�DeserializationFailedV�V�xmllang�en-US��The formatter threw an exception while trying to deserialize the message: There was an error while trying to deserialize parameter http://tempuri.org/:objLVProposalDataXml. The InnerException message was 'There was an error deserializing the object of type System.String. '�Y@objLVGeneralServiceAppData b8http://schemas.datacontract.org/2004/07/GeneralServiceBL i)http://ww' contains invalid UTF8 bytes.'. Please see InnerException for more details.
Thanks,
Abhijitk
Hey.
Running Truclient 12.53, patch 4 and using web protcol. This out of the blue started happening to me, when I log out of my applicaion while in develper mode, it pops up another 2 tabs. The tabs that open then kick the test out of standard mode. Also when I drag over the generic object step and try to ID and object its really slow and if I dont move my mouse at all it seems like more browser windows open every like 10 seconds. Any ideas on what can cause this or why it just stated to happen?
Hello,
I recently upgraded from LoadRunner 12.02 to 12.53 Patch #4. The hardware setup has been the same for years. It's a small environment with only 250 Web HTML virtual users. Two servers are used, each with the full install. One has the license installed and acts as the Controller. When test are run, both machines are used as Load Generators (50/50). Since upgrading, the response times are about twice as high and throughput is cut in half, but only for work done on the Load Generator that is also the Controller. This is even with a test using only 1 virtual user. If we swap machines and make the other act as the Controller, then that is the slower of the two Load Generators. Is there some configuration or setup that I can do to make performance just as good when the Controller and Load Generator are running from the same machine? Is it a new requirement that the Load Generators be seperate from the Controller?
Thanks,
Greg
Hello Experts,
1)Is it advisble to have Controller machines and Load generator machines are different geo graphical locations and under different network?
2)Our Client has LG's moved to calif and users are in NY. At this moment our client is not willing to purchase any additional licenses for NV or other tool. So in this case i have asked our client not to move the LG machines to Calif and keep them at NY to simulate real user behavior. Is this this correct approach?
I will be using below code for reading (not consuming) data from a VTS table. My question is; whether this will work for around 50 concurrent users or do I need to make any updates on this? In my scenario, I require to use unique data. My doubt in this code is;whether I will get duplicated data.
int colSize;
int iRow;
// Obtain the count of rows populated for column named "Col1":
colSize = lrvtc_column_size("Col1");
lr_message("*** Col1 size = %d",colSize);
for( iRow = 1; iRow <= colSize; iRow ++ ) {
// Retrieve, for the physical row index given, all columns:
rc = lrvtc_query_row( iRow );
lr_message("Row %d Col1=%s", iRow, lr_eval_string({Col1}));
}
Dear Team,
I'm using load runner 12.00 on Windows 8. I have installed VTS 11.52 and configued port as 4000 by default. VTS is not launching. Kindly help to solve the issue. Please let me know if any information required.
