Any one kindly let me know how do i download, install J2EE/.net addin after installing LR 11.52
Kindly let me know how do i download, install J2EE/.net addin aftere installing LR 11.52
↧
↧
Using Analysis，raw data shows localhost data only，cannot show data in other Load Generator.
The Loadrunner version I using is 11.00.
My load Scenario useing 4 Load Generator includ localhost.
When analysis report created,raw data shows localhost data only，cannot show data of other Load Generator.
I can't find Solution,for help!
↧
Intermittent [GENERAL_MSG_CAT_SSL_ERROR] . Connection reset by peer
Hi,
The exact issue is that, I am receiving this intermittent error from only one location out of three locations. I looked through HP support forum for a possible solution for the error mentioned above, but could not found a suitable answer. I already tried several options like using "web_set_sockets_option", changes in RTS, etc. but still I'm not able to crack this.
Please help me on this by sharing your thoughts.
Thanks.
↧
Load Runner can handle Python code
Hi,
We can handle python code in Loadrunner.
If yes please provide me example, it can help me alot.
Thanks,
Mahesh.
↧
Can I run loadtest in HP ALM using NeoLoad scripts
Hi,
There is a requirement in one of our projects to move from NeoLoad to HP LoadRunner. So can you please let us know if we can use NeoLoad scripts in HP ALM to run a loadtest. As there are lot of scripts developed using NeoLoad just want to know if we can reuse those scripts instead of recreating them using Loadrunner.
Regards
↧
↧
.Net desktop app script
Hello,
I'm triying to record a desktop app .Net . I don't know so much about the app's code. I'm triying to make a filter to record the journey adding app.exe and some app's *.dll.
It start to record but after login fail whith an unexpected error (from the app).
The last traces of recording log are :
--------------------------------------------------
[dotNet2 (14a4:16bc)]
Object Type : System.Void
Instance ID : 0
Method : Tid.Connect.Startup::Main
--------------------------------------------------
[dotNet2 (14a4: a4c)]
Object Type : Tid.Rtc.PjSip.pjsua.pjsua_config
Instance ID : 14072
Method : Tid.Rtc.PjSip.pjsua.pjsua_config::Dispose
--------------------------------------------------
I looked into at this interfaces ( Dispose, Main ) and the Object Type " System.Void " and they are into mscorlib.dll (dll of .net framework) but I can't add that library because Filter Manager of VuGen show :
"A reference to "mscorlib" could not be added. This assembly cannot be viewed or manipulated through the Filter Manager"
Anyone can help me about that filters?
Thanks
↧
generator throws error: exceeded 80% of its CPU
My generator throws error: exceeded 80% of its CPU when running some performance test, the error appears about 5-10 minutes after the test started. The tests did finish after 45-100 minute as scheduled. Will the test result been impacted?
↧
Can TruClient force test to terminate?
Is there any way for a TruClient script to cause a multi-user test to terminate (not just the Vuser running the script, but all the Vusers in the test)?
I have a complex multi-user scenario where most of the scripts are in a loop checking for available data (with a wait to check again). One of the Vusers will discover the condition that signals the end of the test and needs to terminate itself and all the other running Vusers so the complete test will end. Is there any way to do that?
↧
Unable to record script for a window based flex application.
Hi,
Am in the process of recording scripts for a window based flex application.
After i select the protocol, when i click record, am getting a popup saying the below error
"The application requires a version of Adobe AIR which cannot be found. Please download the latest version of the runtime from http://www.adobe.com/go/getair or contact the application author for an updated version".
So i accessed the above link and installed the Adobe AIR, even after installing it, when i start the recording am getting the same error message again.
I tried with many protocols and for all the protocols am getting the same error.
Note - am not getting the above error if i record scritps for a web based application.
Can any one help me on this.
↧
↧
Issues when recording a script against a HTTPS site
Hello all,
Hope someone could give us a hand to solve this!!
We are trying to record a script in VuGen 11.52.
Our license only admits the following type of scripts:
-Media Player
-Real Player
-Web (HTTP/HTML) & Web(Click and Script)
-Web HTTP
-Mobile Application - HTTP/HTML
When we try to record the script against a HTTPS site, the resulting script appears blank; all the transactions are empty.
Is there a way to solve this issue?
Sorry if the solution is easy, we are just in the first steps of using this tool!! Thanks in advance for your time!
Best
P.S. This thread has been moved from Performance Center Support and News Forum to LoadRunner Support Forum. -HP Forum Moderator
↧
Authentication error during replay
HI,
I am using web protocol and able to record my application successfully.
While replay, I am getting error :
vuser_init.c(50): Error -26547: Authentication required, please use web_set_user, e.g. web_set_user("domain\\user", "password", "host:port"); [MsgId: MERR-26547]
vuser_init.c(50): Error -26630: HTTP Status-Code=401 (Unauthorized) for "https://....XYZ...
When I am using web_set_user() function getting another error :
vuser_init.c(12): Error -27243: Invalid port [MsgId: MERR-27243]
vuser_init.c(12): web_set_user highest severity level was "ERROR" [MsgId: MMSG-26391]
I have tried with all the ports like 443,8080 and 80.
As an work around I enabled Winlet replay instead of socket (in the runtime settings->Preferences).The Vugen runs fine but while running in performance center load generator I am getting :
vuser_init.c(48): Error -27492: "HttpSendRequest" failed, Windows error code=6 and retry limit (100) exceeded for URL="https://...XYZ..."
Need help to fix this.
↧
Loadrunner crashes when tried recording with Ajax Trueclient IE in vugen 11.52
Hi ,
I am trying to record or run Truclient IE scripts on Loadgenerator . When I try to record a script or run an existing Truclient IE script LoadRunner crashes. Screenshot is below. The crash occurs when you click on Develop Script.
I’ve also noted that when running a load test on controller, if loadgenerators are selected, the scripts fail to run.
We recently upgraded IE on these 2 servers from IE8 to IE10 as IE8 does not support Truclient IE and I wanted to use them to generate load. So it may be some sort of configuration or compatibility issue as Trueclient IE has never been run on these servers before.
Truclient IE runs fine on dlvlc01 which has IE9 installed.
kindly help on the compatibility issues with Trueclient IE with IE 10
P.S. This thread ahs been moved from Performance Center Support and News Forum to LoadRunner Support Forum. - Hp Forum moderator
↧
Convert LoadRunner 11 scripts to loadrunner 12
Hello,
I've been looking for help on this topic all over the internet. For an application I test, I can´t record on my 64 bit computer, so I use a virtual machine with LoadRunner 11. Then I open the script with LoadRunner 12.01. The problem is that sometimes LoadRunner 12 says that it can´t load the script because it is empty. Other times I fixed thi by ziping the script, or saving it agai, but now y have an script dat doesent upgrade. Any help regarding this problem would be great.
Thank you in advanvce,
↧
↧
Load Runner :Script in VuGen Works but that fails in Controller (File Upload Problem)
I have recorded my script with VuGen and run for multiple users without problem in VuGen but the same script fails for second user in Controller. In my script, a Vuser downloads excel filefrom a website to local file system and uploads it back to website.
I have used WriteDatatoFile function to save server's response to an excel file and Delete File function to delete this excel file at the end of uploading. Since at the beginning in VuGen, it writes first excel file data on second excel file. After adding these functions, for second VUser it only downloads its own excel file to the local in VuGen but in Controller it again writes first excel file data on second excel file so it can not be uploaded to the website and fail.
Here is the log:
Action.c(524): Error -35049: No match found for the requested parameter "CP". Check whether the requested regular expression exists in the response data
And my script is attached.
↧
LR 12: Connection Reset by peer errors for mobile http/html protocol
Hi,
We have created the scripts for Android and IOS devices, and during load test execution we found that after 100 vusers (total were 420) load, suddenly a huge number of errors appears as "Connection Reset by peer", and all transactions started failing.
Debugging:
We have included following two functions using which it closes the connection after every single execution.
web_set_sockets_option ("SHUTDOWN_MODE", "ABRUPT"); (included at the start step) and
web_set_sockets_option("CLOSE_KEEPALIVE_CONNECTIONS", "1"); (Included after the POST step)
LR details:
1. Using LR 12 version.
2. Protocol: mobile web http/html
Please suggest, how do we resolve this issue....
Thanks,
Prasanna
↧
SLA for user transactions / data points
Hello,
can I set up SLA for any user transaction? SLA wizzard shows only Actions_Trasnsaction and vuser_init/end_Transactions. How do I "register" my transactions and user data points in order to be able to set up SLAs?
Thank you!
↧
TCS has stopped working" error when starting TruClient IE script in LR12
Trying to script on Windows 2008 with LR V12.
TruClient with FF works fine.
TruClient with IE is getting an error of "TCS has stopped working"
Inital research has shown problems with security software. These servers were built for LR and don't have any security software installed.
Also thought about DEP ... did command bcdedit /set nx AlwaysOff .. as admin, but still get the error.
Need help to resolve. The client would prefer all testing to be done in IE.
↧
↧
Loadrunner 11 - configuring runtime file storage for load generator
Hello,
I am using a load generator that has 2 drives (C: drive and D: drive). When a scenario is run using this load generator, it uses c: drive for runtime file storage by default.
Is there anyway to configure it to use D: drive for runtime file storage instead of c: drvie?
Thanks.
↧
How do I change the user’s quantity in Real-word Schedule by test, By Number?
Hello,
ALM Performance Center Version :12.0
How do I change the user’s quantity in Real-word Schedule by test, By Number?
Because, users filed is disabled, and as soon as i design the scenario in the Global Scheduler, its assigns the users automatically.
For Ex: I have designed scenario useing real-World Schedule by test, By Number for 452 users for 196 scripts.
It automatically assigned the No. Of users for each script irrespectivly.Most of the scripts assigned 0 users. And for some scripts 91 users like that.
There is no way to modify the users.
How do I do that?
I can modify the user quntity by selecting the Real-world schedule by test, percentage mode.
Please advise me, tomorrow I have to kickoff the test for 452 users.
Thanks,
Rajani
↧
Error occurred while select menu object (Oracle NCA)
Dear all,
I'm trying to do a testing for oracle form based application.
I chose the 'Oracle - Web App 11i' as the recording protocol.
The process was recorded but error occurred while replaying to the place where selecting an item from menu.
The code is as following:
lr_start_transaction("Navigation");
nca_set_window("Window A");
nca_menu_select_item("Window A", "Menu;SubMenu1;SubMenu1-1;Item");
After choosing 'Extended log', I could find the following log:
Action.c(206): Notify: Transaction "Login" ended with "Pass" status (Duration: 13.2971 Wasted Time: 0.2805).
Action.c(210): Notify: Transaction "Navigation" started.
Action.c(212): nca_set_window("Window A")
Action.c(214): Checking for active timers...
Action.c(214): No timers found, exiting.
Action.c(214): Object not found in the list:
Action.c(214): ObjID=1, Name=, Visible=0
Action.c(214): ObjID=1; ObjName="(null)", visble=0, key="1"
Action.c(214): Error: nca_menu_select_item("Window A","Menu;SubMenu1;SubMenu1-1;Item") failed, Window or object is not displayed.
Action.c(214): Notify: Transaction "Navigation" ended with "Fail" status (Duration: 0.0053).
Abort was called from an action.
Ending Vuser...
Starting action vuser_end.
Ending action vuser_end.
Vuser Terminated.
Is it caused by the Name/objName which is null?
Besides, the first character of each item is captical. Is there any impact?
Can you give me some suggestions?
Thanks in advance!
↧
More Pages to Explore .....
